Across Florida · Vetted local pros
How do you clean chimney bricks?
A straight answer first, then what you can safely check yourself and when to get a pro. Free estimates from a vetted MB pro near you.
Clean chimney bricks gently: a soft-bristle brush, mild detergent and plain water, worked from the bottom up and rinsed with a garden hose, not a pressure washer. Inside the firebox, let everything cool completely, brush out loose soot and ash, then scrub the bricks with a mild soap solution. Keep both jobs to what you can reach safely from the ground or the living room floor.
The nuance is that what looks like dirty brick is not always dirt. Black or green growth is usually algae or mildew, white chalky streaks are mineral salts, and dark staining from the fireplace opening can be soot or creosote. Each needs a different approach, and some signs point to a water or masonry problem that scrubbing will not fix.
Why chimney bricks get dirty
Florida's long wet season and year-round humidity let algae, mildew and mold take hold on shaded or north-facing brick. Wind-driven rain adds to it. Brick is porous, so it holds moisture, and the growth often comes back unless the moisture source is addressed.
White powdery deposits, called efflorescence, appear when water moves through the brick or mortar and leaves mineral salts on the surface. Brushing them off is a short-term fix. If they keep returning, water is probably getting in through a cracked crown, failed flashing or open mortar joints.
Inside, soot and creosote build up from burning wood. Light soot on the firebox bricks is a cleaning job. Creosote inside the flue is a different matter: it is a fire hazard, and it is removed by sweeping the flue, not by scrubbing bricks.
What you can check yourself
Look at the stain from the ground
Green or black patches that feel slimy or fuzzy are usually algae or mildew. White chalky streaks are mineral salts. Binoculars let you see the top without climbing anything.
Test a small, hidden spot first
Scrub a small area with a soft brush, mild soap and water, then let it dry before judging the result. If bricks shed grit or the mortar crumbles, stop scrubbing.
Skip pressure washers and harsh chemicals
High pressure can strip the brick face and wash out mortar, which lets in more water. Strong acids can damage brick and nearby metal, so leave those to a pro.
Check the firebox only when it is cold
Once the fireplace has been unused and cool for a good while, look at the bricks with a flashlight. Light, dusty soot can be brushed and wiped. Shiny, tar-like or flaky black buildup is a sign to call a sweep.
Note moisture signs indoors
Water stains on the ceiling or wall near the chimney, or a damp smell from the fireplace, suggest water is entering from above.
When to call a pro
Get a pro if the stained area is high on the stack, if you would need a ladder or roof access to reach it, or if you see cracked or missing mortar, leaning or loose bricks, a damaged crown or a missing cap. Stains that return soon after cleaning, glossy creosote in the firebox or any smoke or carbon monoxide concern also call for a pro, not a scrub brush.
Florida does not license chimney sweeps at the state level, so cleaning and inspection are generally unlicensed work. Ask whether the sweep holds voluntary CSIA certification. Rebuilding masonry, relining or altering a fireplace is different: Florida requires an appropriately licensed contractor for that work, and it typically needs a permit from the local building department. Check the license category on the Florida DBPR website. We match you with a vetted pro near you, and the pro is responsible for any permit the job needs.
Your MB pro handles the permit when the job needs one. You can look up a contractor's license at Florida DBPR.
What a pro will do
- Inspect firstYour MB pro looks at the bricks, mortar, crown, flashing and flue to find out whether the staining is surface growth, soot or a sign of water entry.
- Clean the right waySurface growth and stains are treated with methods suited to the brick, and the flue is swept if creosote is present.
- Repair what is letting water inCracked crowns, failed flashing and open mortar joints are repaired so the staining does not return. In hurricane-prone areas, caps, crowns and flashings need to be attached to resist high wind uplift and wind-driven rain.
- Add protectionA pro can fit a cap to keep out rain and animals, and discuss waterproofing once the brick is clean and sound.
How it works
Step 1
Tell us what you need
Call or send the short form with your city and the job. Estimates are free.
Step 2
We match you with a vetted pro near you
We pick a vetted pro from our network who works in your part of Florida and book the visit.
Step 3
Your pro gives a free estimate and does the work
Your MB pro looks at the job and gives you a free estimate. You decide whether to go ahead — and we stay your point of contact.
Related questions
- Can I use a pressure washer on chimney bricks?
- It is best to avoid it. High pressure can erode the brick surface and blast out mortar, which lets in more water. A soft brush and a garden hose are safer for a homeowner.
- How do I get soot off the bricks inside the fireplace?
- With the fireplace fully cool, brush off loose soot, then scrub with a mild soap solution and wipe clean. If the staining is thick, shiny or smells strongly, a sweep should inspect the flue.
- What are the white streaks on my chimney brick?
- They are usually mineral salts carried out by moisture. If they keep coming back, ask a pro to check the crown, flashing and mortar for water entry.
- What should I ask a pro before they clean my chimney?
- Ask what method they will use on the brick, whether they will inspect the crown, cap and flashing, and whether they hold CSIA certification. Also ask what they would do if they find damage, and whether it would need a permit.
- How do I get a free estimate?
- Call (954) 707-6550 or use the form on the page. We match you with a vetted pro near you and book the visit, and the pro gives you the free estimate.
Request a free chimneys estimate
Tell us what's going on. We'll match you with a vetted pro near you.
- 1Tell us what you need.
- 2We match you with a vetted pro near you.
- 3Your pro gives a free estimate and does the work.
Prefer to talk?
(954) 707-6550