MB Home Improvements

Across Florida · Vetted local pros

How do you seal a driveway?

A straight answer first, then what you can safely check yourself and when to get a pro. Free estimates from a vetted MB pro near you.

You seal a driveway by cleaning it thoroughly, filling the cracks, priming oil spots, patching any broken areas, and then applying seal coat in thin, even coats on a dry day. The driveway then stays closed to traffic until the sealer has cured.

The nuance is that sealer protects sound asphalt; it does not repair damaged asphalt. Sealing over potholes, crumbling edges or open cracks hides the problem for a short time while water keeps destroying the base underneath. The pavement has to be repaired first.

What's involved, and why Florida matters

Asphalt gets grey, brittle and porous as UV light oxidizes the surface. Water then gets into cracks and weakens the base, and oil or fuel drips soften the binder. Seal coat is a protective layer that slows all of that down. It only works if it bonds to a clean, repaired surface.

Florida's conditions make timing important. Intense sun ages asphalt quickly, and the long wet season (roughly June through October) brings daily thunderstorms. Humidity also feeds algae and mildew on driveways. Sealer needs a clean, dry surface and a dry stretch of weather afterward, so a pro will watch the forecast, not just the calendar.

Age matters too. Sealing brand-new asphalt too early is a known mistake, because the pavement needs time to cure first. If your driveway was just paved, ask the paving contractor when it is ready.

What you can check yourself first

Look at the color and surface

Dark and smooth is healthy. Grey, rough, or loose gravel-like texture means oxidation, and the driveway is a good candidate for sealing.

Map the cracks and holes

Walk the driveway and note hairline cracks, wide cracks, potholes and crumbling edges. Hairline cracks are usually handled before sealing. Holes and broken edges need patching, not just sealer.

Find oil and fuel spots

Soft, dark stains where a car parks have softened the binder. Tell the pro about them, because they need special priming or sealer will not stick.

Watch where water goes after rain

Puddles that sit for a long time point to a low spot or drainage problem. Sealer will not fix that, so mention it when you request an estimate.

Check your HOA or condo rules

Many Florida communities have association rules about exterior work and colors. Confirm before booking so there are no surprises.

When to stop and call a pro

Get a pro involved if you see soft or sinking spots, crumbling edges, potholes, or a network of connected cracks that looks like alligator skin. These signs usually mean the base has been damaged by water, and the area needs patching or deeper repair before any sealer goes on. Large driveways, private roads, and jobs that include line striping or markings are also better left to a pro with the right equipment.

Florida's state license list under ch. 489, F.S. covers roofing, plumbing, air-conditioning, electrical, pool and general, building and residential contracting. Seal coating is not named there, so ask the pro what local requirements apply, such as a business tax receipt, and ask for proof. For any contractor, you can check the Florida DBPR website, or confirm with your local building department. We match you with a vetted pro near you and book the visit.

Your MB pro handles the permit when the job needs one. You can look up a contractor's license at Florida DBPR.

What your MB pro will do

  • Clean the surfaceYour MB pro will remove dirt, debris, loose material and algae so the sealer can bond.
  • Clean and fill cracksCracks are cleaned out and filled with a rubberized crack filler so water cannot get into the base.
  • Prime oil spots and patch damageOil and fuel stains are primed, and potholes and broken edges are patched before any coating goes down.
  • Apply the seal coatThe sealer is applied by squeegee or spray in even coats, then the driveway is kept closed until it cures so tires do not leave marks.
  • Add markings if neededFor parking areas and private roads, your pro can handle line striping and markings after the sealer cures.

How it works

  1. Step 1

    Tell us what you need

    Call or send the short form with your city and the job. Estimates are free.

  2. Step 2

    We match you with a vetted pro near you

    We pick a vetted pro from our network who works in your part of Florida and book the visit.

  3. Step 3

    Your pro gives a free estimate and does the work

    Your MB pro looks at the job and gives you a free estimate. You decide whether to go ahead — and we stay your point of contact.

Related questions

Can I seal my driveway during the rainy season?
Sealer needs a dry surface and a dry window to cure, so a pro will schedule around the daily storms. If rain is likely soon after application, the job should wait.
How long before I can drive on it?
It depends on the product, temperature and humidity. Ask your pro for a clear time for foot traffic and for cars, because driving on it too soon leaves tire marks.
How often should a driveway be resealed?
It depends on sun exposure, traffic, drainage and the age of the asphalt. A pro can look at the surface and tell you whether it needs sealing now or can wait.
Will sealing fix cracks and potholes?
No. Cracks need to be cleaned and filled and potholes patched first. Sealer then protects the repaired surface.
What does it cost to seal a driveway?
The cost depends on the size of the driveway, how much crack filling and patching it needs, oil spot treatment, access, and what the pro finds once the surface is cleaned. Call (954) 707-6550 or use the form for a free estimate from a pro we match you with.

Request a free seal coating estimate

Tell us what's going on. We'll match you with a vetted pro near you.

  1. 1Tell us what you need.
  2. 2We match you with a vetted pro near you.
  3. 3Your pro gives a free estimate and does the work.

Prefer to talk?

(954) 707-6550

We only use your details to handle your request and share it with your MB pro. See our privacy policy and terms.

(954) 707-6550Free estimate