MB Home Improvements

Across Florida · Vetted local pros

How to build a fence?

A straight answer first, then what you can safely check yourself and when to get a pro. Free estimates from a vetted MB pro near you.

To build a fence, confirm your property line, check city height and setback limits and any HOA rules, get the permit, then mark the line, set the posts, hang the panels or pickets and install the gates. In Florida, the steps that decide whether a fence lasts are the survey, the permit and how the posts are set in sandy, humid, storm-prone ground.

The nuance is the pool. If the fence is part of a pool barrier, it has to meet pool safety rules, including self-closing, self-latching gates, and that changes the design from the start.

What's involved in building a fence

The work runs in a set order: confirm the boundary, get approvals, locate underground lines, lay out the fence line, dig and set posts, attach rails and panels, then hang and adjust the gates. Most of the mistakes happen in the first steps. A fence built on the wrong side of a property line without a survey can mean tearing it out.

Florida conditions shape the rest. Sandy soil can loosen posts over time, so they need to be set deep and solid. Humidity brings rot and termites at the ground line in wood fences, and coastal salt air corrodes fasteners and hinges, so corrosion-resistant hardware matters. Solid privacy panels also catch wind like a sail during a hurricane, so the post spacing, footing and panel style need to be planned for it.

Rules vary by place. Fences usually need a building permit in Florida cities, and the pro normally pulls it. In Miami-Dade and Broward counties, the High-Velocity Hurricane Zone brings stricter requirements. Elsewhere in Florida, the Florida Building Code wind rules apply. Confirm the details with your local building department. Many neighborhoods, condos and deed-restricted HOA communities also require association approval before any permit.

What to check before anything gets built

Find your survey and boundary markers

Look for your property survey and the corner pins or markers. If you can't find them or aren't sure, a new survey is the safe step before any post goes in.

Read your HOA or condo rules

Check the governing documents for allowed materials, height, color and style, and whether you need written approval first. Approval is often separate from the city permit.

Call the building department

Ask whether a permit is required for your fence, what height and setback limits apply, and whether pool or wind rules affect it. Get the answer for your exact address.

Walk the line and look at the ground

Note slopes, low spots that hold water, trees and roots, sprinkler lines and existing fences. These affect post placement and how the panels step down.

Think about the pool and the neighbors

If a pool is involved, a pool barrier has its own rules. If the fence sits on a shared line, talk to your neighbor first and agree on who owns and maintains it.

When to stop and get a pro

Get a pro if the property line is unclear, the fence is part of a pool barrier, the run is tall or solid in a wind-exposed spot, the ground slopes sharply, or you want a drive gate or an electric gate operator. Gate operators involve electrical work, and digging without having underground lines located first is a safety risk. These are past the point of a weekend project.

The permit and license angle matters too. Florida licenses many trades under ch. 489, F.S., and fence permit and licensing rules can vary by city and county, so ask the building department what applies to your job. Your pro is responsible for any permit and any license the work requires. Verify a contractor's license on the Florida DBPR website. We match you with a vetted pro near you and book the visit.

Your MB pro handles the permit when the job needs one. You can look up a contractor's license at Florida DBPR.

What your MB pro will do

  • Review the site and the rulesYour MB pro looks at the survey, height and setback limits, HOA requirements and pool barrier rules, then gives you a free estimate.
  • Handle the permitThe pro pulls the permit where one is needed and schedules the work around it.
  • Set posts for Florida groundPosts are set deep and solid for sandy soil and wind load, with treated or corrosion-resistant materials chosen for humidity and salt air.
  • Install panels, pickets and gatesWood privacy, vinyl, aluminum, ornamental steel or chain link goes up level and to the planned height. Walk and drive gates are hung so they swing and latch correctly, and pool gates self-close and self-latch.
  • Questions worth askingAsk who pulls the permit, how the posts will be set, what hardware is used, how wind is handled and what happens if the survey shows a conflict.

How it works

  1. Step 1

    Tell us what you need

    Call or send the short form with your city and the job. Estimates are free.

  2. Step 2

    We match you with a vetted pro near you

    We pick a vetted pro from our network who works in your part of Florida and book the visit.

  3. Step 3

    Your pro gives a free estimate and does the work

    Your MB pro looks at the job and gives you a free estimate. You decide whether to go ahead — and we stay your point of contact.

Related questions

Do I need a permit to build a fence in Florida?
Fences usually need a building permit in Florida cities, often with a survey. Rules differ by city and county, so verify with your local building department. Your MB pro pulls the permit when one is required.
What affects the cost of a fence?
Length, height, material, gates, slope and access, the permit and survey, HOA requirements, and what the pro finds once the ground is opened up, such as roots or old footings. A free estimate from your MB pro gives you a number for your yard.
Which fence holds up in hurricane winds?
Solid privacy panels take the most wind load, so their posts and footings matter most. Open styles like aluminum or picket let air through. Ask your pro how the design is built for wind in your area, and note that stricter HVHZ rules apply in Miami-Dade and Broward.
Can I build a fence right on the property line?
Only after you know where the line is. Setback rules, easements and HOA limits may keep a fence off the line, and a survey settles the question. Talk to your neighbor before building on a shared boundary.

Request a free fencing estimate

Tell us what's going on. We'll match you with a vetted pro near you.

  1. 1Tell us what you need.
  2. 2We match you with a vetted pro near you.
  3. 3Your pro gives a free estimate and does the work.

Prefer to talk?

(954) 707-6550

We only use your details to handle your request and share it with your MB pro. See our privacy policy and terms.

(954) 707-6550Free estimate