Across Florida · Vetted local pros
Get matched with a automatic gates pro in Lauderdale-by-the-Sea, FL
Automatic Gate Repair for homes in Lauderdale-by-the-Sea and the surrounding area, by a vetted MB pro near you. Free estimate.
What to check first
What you might be seeing
- The gate moves slowly, jerks or stops partway
- The remote or keypad does nothing, but the house has power
- The motor hums or clicks without moving the gate
- The gate reverses for no reason or won't close
- Rust or green-white crust on the operator, hinges or keypad
Safe to check yourself
- Replace the remote battery and try the keypad to see whether the problem is the remote or the gate.
- Look at the photo-eyes on each side of the opening for blockage, a knocked-out-of-line sensor or a heavy salt film.
- Look along the track or swing path for debris, sand or overgrown plants, without touching the moving parts.
- Check whether the neighborhood lost power or you had a recent storm, and look at any battery or solar backup indicator light.
Stop and get a pro if…
- Exposed or damaged wiring, a burning smell, or buzzing after a lightning strike or surge
- A gate that is off its track, leaning, sagging or hanging by one hinge
- Any gate that closes on a person, pet or car, which suggests the entrapment sensors are not working
- Heavy rust at the operator mounting, posts or footings
What to ask the pro
- Will the repair keep the operator's entrapment protection working to UL 325 standards?
- Is the line-voltage electrical work being done by a licensed electrical contractor, and can I verify that license on the Florida DBPR website?
- Does this job need a permit, or is it a like-for-like repair of the existing operator?
- Can you use stainless or coated hardware given how close I am to the beach?
- Can I have the free estimate in writing before work starts?
Most of Lauderdale-by-the-Sea sits within a few blocks of the Atlantic, so a gate that grinds, stalls or won't open usually points to salt. Constant salt-laden wind and spray corrode gate operators, motors, hinges and keypads, and the wet season's near-daily thunderstorms from June through October add power surges that can knock out a control board. Start with what you can see and hear, and know when to stop.
When you call (954) 707-6550 or send the form, we match you with a vetted, independent pro near you and book the visit. We stay your point of contact. Your MB pro gives the free estimate and handles the repair, whether that is an operator, swing or slide gate hardware, a keypad or intercom, safety sensors or battery backup.
The town is only a few blocks wide between the Atlantic and the Intracoastal, so galvanized gate hardware, operators and deadbolts can rust out years faster than they would inland in Broward. Salt, humidity and summer lightning all hit the same gate hardware. Rinsing and regular service help, and stainless or coated parts are worth asking about.
Problems to watch for in Lauderdale-by-the-Sea
Salt-corroded operator and hinges
Coastal salt spray eats at motors, arms, chains and hinges, so a gate can bind or strain well before it fails outright.
Surge damage to the control board
Lightning and power surges during the June–September storm season are a major cause of operator and control board failures.
Photo-eyes that won't line up
Salt film, a bumped bracket or moisture can keep the safety sensors from working, and the gate may refuse to close.
Keypad or intercom failure
Humidity and wind-driven rain can get into keypads and intercoms, leaving residents or visitors unable to get in.
Dead gate after a power outage
Hurricane and tropical-storm outages can leave a gate stuck shut or open, and a battery or solar backup helps avoid that.
Storm-bent gate or track
After high winds, a swing gate can sag or a slide gate can come off its track and need hardware work before the operator can run.
What your MB pro can help with
- Gate opener repair and replacementYour MB pro can diagnose the operator and repair it or replace it if salt has done too much damage.
- Swing and slide gate hardwareHinges, rollers, tracks and latches can be replaced, ideally with corrosion-resistant parts for a beachside property.
- Keypads and intercomsYour pro can restore or replace the entry controls residents and guests use every day.
- Safety sensors and loopsPhoto-eyes and loop detectors can be tested, aligned or replaced so the gate meets entrapment-protection expectations.
- Battery and solar backupA backup keeps the gate working through the outages that tropical storms can bring.
Permits and codes in Lauderdale-by-the-Sea
Florida does not issue a dedicated statewide automatic gate license, and mechanical gate and operator service is often done without a construction license. The line-voltage electrical work feeding an operator must be done by a licensed electrical contractor under the DBPR Electrical Contractors' Licensing Board, so verify that license on the Florida DBPR website. A new gate, operator, columns, footings or electrical circuit generally needs building and/or electrical permits, while a like-for-like repair of an existing operator usually does not. Operators are expected to meet UL 325 and ASTM F2200 standards. Lauderdale-by-the-Sea is in Broward County, part of the High-Velocity Hurricane Zone, so gate structures face stricter wind provisions and some products may need a Miami-Dade Notice of Acceptance. Confirm emergency-access requirements such as a Knox box with the local fire marshal and permit questions with the local building department. Condo and HOA properties may also need association approval.
Your MB pro handles the permit when the job needs one. You can look up a contractor's license at Florida DBPR.
When to reach out
Demand rises ahead of and during hurricane season (June–November, peaking August–October) and again in the November–April snowbird season, when seasonal owners return and have deferred repairs done. If your gate is acting up, getting it checked before the storm season is easier than waiting until after a surge. Call (954) 707-6550 or request a free estimate with the form on the page. We have offices in Tamarac and Plantation, and we match you with a vetted pro near you.
We match homeowners in Lauderdale-by-the-Sea, including the Downtown / Commercial Boulevard village center, El Prado Park area, El Mar Drive beachfront, Terra Mar and Bel Air, plus nearby Sea Ranch Lakes, Imperial Point, Coral Ridge, Hillsboro Shores and Lighthouse Point.
How it works
Step 1
Tell us what you need
Call or send the short form with your city and the job. Estimates are free.
Step 2
We match you with a vetted pro near you
We pick a vetted pro from our network who works in your part of Florida and book the visit.
Step 3
Your pro gives a free estimate and does the work
Your MB pro looks at the job and gives you a free estimate. You decide whether to go ahead — and we stay your point of contact.
Automatic Gates in Lauderdale-by-the-Sea: common questions
- Why does my gate keep failing so close to the beach?
- Salt-laden wind and spray corrode motors, hinges, chains and keypads in Lauderdale-by-the-Sea, where most of the town is within a few blocks of the Atlantic. Ask your MB pro about stainless or coated hardware and regular rinsing and service.
- Can a lightning strike really kill my gate operator?
- Yes. Lightning and power surges during the June–September storm season are a major cause of operator and control board failures. If the gate went dead after a storm, stop and have a pro look at it.
- Do I need a permit to repair my gate operator?
- A like-for-like repair of an existing operator usually does not need one. A new gate, operator, columns, footings or electrical circuit generally does, so verify with the local building department.
- Is it safe to use the gate if the safety sensors don't work?
- No. Photo-eyes protect people and vehicles from entrapment, and operators are expected to meet UL 325 standards. Stop using the gate automatically and get a pro to look at it.
- I live in a condo along El Mar Drive. Who handles the gate?
- It depends on whether the association or you own the gate, and exterior work may need association approval. Check with your association first, then call us and we can match a pro for the visit.
Request a free automatic gates estimate in Lauderdale-by-the-Sea
Tell us what's going on. We'll match you with a vetted pro near you.
- 1Tell us what you need.
- 2We match you with a vetted pro near you.
- 3Your pro gives a free estimate and does the work.
Prefer to talk?
(954) 707-6550