Across Florida · Vetted local pros
Get matched with a sliding doors pro in West Palm Beach, FL
Sliding Door Repair for homes in West Palm Beach and the surrounding area, by a vetted MB pro near you. Free estimate.
What to check first
What you might be seeing
- The door scrapes, grinds or needs a hard shove to slide
- The lock or latch no longer lines up, or the door closes but won't stay locked
- Water or damp staining at the bottom of the door after a heavy summer rain
- Visible white or chalky corrosion on the aluminum track or rollers
- A cracked pane, or a gap or draft where the door meets the frame
Safe to check yourself
- With a flashlight, look along the bottom track for sand, grit, leaves or pet hair that may be blocking the rollers.
- Slide the door gently and listen: grinding or clicking points to worn rollers, while a smooth door that won't latch points to alignment or the lock.
- Look at the latch and the strike plate on the frame to see whether they still line up when the door is closed.
- After a rain, check the sill and floor beside the door for water stains or soft, swollen flooring, and take photos for your pro.
Stop and get a pro if…
- Stop if the glass is shattered or cracked. Tempered glass can fail suddenly, so keep people and pets away from it.
- Stop if the door is hanging off the track or leaning in its frame. Do not try to lift a heavy glass panel out yourself.
- Get a pro if the door will not lock, since that is a security problem, especially in a home you are away from.
- Get a pro if water at the sill has left soft or rotted wood or damaged flooring, because the fix may go beyond the door.
What to ask the pro
- Is this a repair or a full replacement, and can I have the estimate in writing?
- If the door is being replaced, who pulls the permit, and will the new unit carry Florida Product Approval and the impact rating or shutter plan this area requires?
- If the work involves replacing glass or the door unit, can I verify the required credential on the Florida DBPR website?
- Can you use stainless or other corrosion-resistant rollers and track capping, given the salt air?
- Does my HOA or condo association need to approve the work first?
West Palm Beach homes have a median build year of 1987, according to the Census, so many sliding doors here have been through decades of salt air, summer downpours and hurricane seasons. If your door grinds, jumps the track, sticks halfway or won't lock, the cause is often worn rollers or a corroded aluminum track. Homes near Flagler Drive and the Intracoastal are the most exposed, because salt-laden air speeds up rust on tracks, rollers and lock cylinders.
Call us and we match you with a vetted, independent pro near you, book the visit and stay your point of contact. Your MB pro gives a free estimate and does the work, whether that is new rollers, a repaired track, a lock and handle fix, screen repair or a weatherstripping and alignment adjustment. One number covers every home service.
Salt-air corrosion is the main maintenance issue in West Palm Beach. Homes on the barrier-island side, along Flagler Drive and near the Intracoastal wear through aluminum tracks, rollers and lock cylinders much faster than inland properties, and stainless or galvanized hardware is often worth the upgrade. The historic districts near downtown also bring 1920s-era openings that can be undersized or non-standard, with original hardware, while newer gated communities west of I-95 often add HOA rules. Roughly half of homes here are owner-occupied, per the Census, so a renter or condo owner may need to loop in a landlord or association before work starts.
Problems to watch for in West Palm Beach
Worn or corroded rollers
Humidity and salt air can seize rollers so the door drags, jumps or sticks, especially in homes close to the Intracoastal.
Pitted or bent aluminum tracks
Corrosion and sand build-up can roughen the track. Stainless track capping can give rollers a smoother, longer-lasting surface.
Locks and handles that won't catch
Salt-air corrosion on lock cylinders, plus a door that has dropped out of alignment, can leave a door that closes but doesn't secure.
Water at the sill in heavy rain
West Palm Beach's heavy summer rain and wind-driven storms can find worn weatherstripping or a clogged track and push water inside.
Cracked or failed glass
Storm debris or a stressed frame can crack a pane. Replacement glass in this area must meet Florida Building Code wind requirements.
Damaged screen doors
Bent frames and torn screens are a regular casualty of year-round humidity and the open-door lifestyle of a snowbird season home.
What your MB pro can help with
- Roller replacementYour MB pro can swap in new rollers so a heavy or sticking door glides again.
- Track repair and stainless cappingYour pro can repair a worn track or cap it in stainless steel, a good fit for salt-air homes near the water.
- Locks, handles and alignmentYour pro can replace a corroded lock or handle and realign the door so it latches and seals properly.
- Glass, weatherstripping and screensFrom insulated or impact glass replacement to fresh weatherstripping and screen repair, your pro will walk you through options at the free estimate.
Permits and codes in West Palm Beach
Repairing an existing sliding glass door, such as rollers, tracks, handles, locks, weatherstripping and screens, generally does not require a state contractor license in Florida, and no permit is typically needed for roller, track or hardware repair. Replacing the door unit, altering the opening, or doing structural or glazing replacement work can fall under licensed contracting, including specialty categories such as glass and glazing, and generally needs a building permit from the local building department. The pro doing the work is responsible for any permit and any license the work requires, and you can verify a credential on the Florida Department of Business and Professional Regulation (DBPR) website. West Palm Beach is not in the High-Velocity Hurricane Zone, but Florida Building Code wind requirements apply: replacement doors are exterior opening protection and need Florida Product Approval (or local approval), with impact-rated glazing or approved shutters in wind-borne debris areas. A door that is part of a pool barrier may also need self-closing, self-latching hardware or an exit alarm, so verify with the local building department.
Your MB pro handles the permit when the job needs one. You can look up a contractor's license at Florida DBPR.
When to reach out
Demand rises in late spring and early summer as owners prepare for hurricane season (June 1 to November 30), again after any named storm, and in October and November when snowbirds reopen seasonal homes and condos. Booking early before the season is easier than waiting for a storm warning, and a door that sticks or won't lock is worth fixing before you leave a home empty. Call (954) 707-6550 or request a free estimate with the form on the page, and we will match you with a vetted pro near you and book the visit.
We match homeowners with pros in Downtown / Clematis Street, Rosemary Square (CityPlace), Northwood, Northwood Shores, El Cid, Flamingo Park, Grandview Heights, Prospect Park, SoSo (South of Southern), Pleasant City, Ibis Golf & Country Club, Bear Lakes and nearby Palm Beach, Lake Worth Beach and Riviera Beach.
How it works
Step 1
Tell us what you need
Call or send the short form with your city and the job. Estimates are free.
Step 2
We match you with a vetted pro near you
We pick a vetted pro from our network who works in your part of Florida and book the visit.
Step 3
Your pro gives a free estimate and does the work
Your MB pro looks at the job and gives you a free estimate. You decide whether to go ahead — and we stay your point of contact.
Sliding Doors in West Palm Beach: common questions
- Why does my sliding door keep sticking in West Palm Beach?
- Year-round humidity, sand and salt-laden air wear down rollers and roughen aluminum tracks, especially near the Intracoastal and Flagler Drive. Clearing debris from the track is a safe first check, but if it still drags, worn rollers are the usual cause and your MB pro can replace them.
- Do I need a permit to repair my sliding door?
- Roller, track and hardware repair typically needs no permit. Replacing the full door unit or changing the opening generally does, and the pro pulls it. Verify with the West Palm Beach building department.
- Can I use any replacement door in my home?
- No. Replacement sliding doors must meet Florida Building Code wind requirements for this area, which means Florida Product Approval (or local approval) and impact-rated glazing or approved shutters in wind-borne debris areas. Ask your pro to confirm the product before work starts.
- My home is a 1920s bungalow near downtown. Can the door still be repaired?
- Often a repair is possible, but historic-district homes can have undersized or non-standard openings and original hardware that is hard to match. Your MB pro can look at the opening at the free estimate and tell you whether repair or replacement makes more sense.
- I live in a condo or HOA community. Who approves the work?
- Condos and deed-restricted communities are a big part of the housing here, and exterior work often needs association approval in addition to any permit. Check with your association before work starts and tell your pro about any rules.
Request a free sliding doors estimate in West Palm Beach
Tell us what's going on. We'll match you with a vetted pro near you.
- 1Tell us what you need.
- 2We match you with a vetted pro near you.
- 3Your pro gives a free estimate and does the work.
Prefer to talk?
(954) 707-6550