MB Home Improvements

Across Florida · Vetted local pros

Find the right automatic gates pro in Pembroke Pines, FL

Automatic Gate Repair for homes in Pembroke Pines and the surrounding area, by a vetted MB pro near you. Free estimate.

What to check first

What you might be seeing

  • The gate hums or clicks but does not move
  • The gate starts to close, then reverses on its own
  • The remote or keypad works only sometimes, or not at all
  • The gate stopped working after a thunderstorm or power flicker
  • Visible rust on the operator, hinges or rollers

Safe to check yourself

  • Look at the photo-eye lenses on each side of the gate. Wipe off dirt or spider webs and check that nothing is blocking the beam.
  • Check that nothing, such as debris, a landscaping branch or a car, is in the gate's path.
  • Test the remote, the keypad and any wall button separately to see which ones respond.
  • Look at the operator's indicator light, if it has one, and listen for a motor hum, clicking or silence.

Stop and get a pro if…

  • A burning smell, scorch marks, exposed wires, or water inside the control box, especially after lightning
  • A gate that does not reverse when it meets an obstruction. This is an entrapment risk, so keep people and pets away.
  • A leaning post, cracked column, bent track or hinges pulling out of the post
  • Any need to open the operator cover, reset a breaker repeatedly or touch the wiring

What to ask the pro

  • Does the repair involve line-voltage electrical work, and who is the licensed electrical contractor doing it? You can verify the license on the Florida DBPR website.
  • Will the photo-eyes and safety devices meet UL 325 when you finish?
  • Does this job need a permit, and who pulls it? A like-for-like operator repair usually does not, but new gates, columns or circuits generally do.
  • If the gate structure is changing, how does it meet Florida Building Code wind-load rules in the High-Velocity Hurricane Zone, and does any product need a Miami-Dade NOA?
  • Can I get the estimate in writing, and do you need my HOA's approval before starting?

Pembroke Pines grew fast, and the Census puts the median home here at 1992 construction, so many gate operators, keypads and photo-eyes in this city are now decades old. Gated communities and HOAs are very widespread here, which means a gate that stops working is often the only way in or out. When you hire for this work, look for a local, independent pro who knows UL 325 entrapment protection, can handle or bring in the licensed electrical work an operator needs, and understands the wind-load rules for Broward County.

Call us and we match you with a vetted, locally owned pro in our network near you, book the visit and stay your point of contact. Your MB pro gives the free estimate and does the work, whether that is an opener repair, swing or slide gate hardware, keypads and intercoms, safety sensors or battery backup. One number covers every home service.

Because Pembroke Pines was built out in a few fast decades, whole subdivisions reach the same maintenance milestones together, and gate operators and opener electronics can age out side by side. Near-daily summer thunderstorms and frequent lightning put control boards at risk, and humidity that stays high all year corrodes keypads, motors and hardware. Even though the city sits inland in western Broward County, easterly breezes still carry salt air, and hurricane season brings high winds and wind-driven rain that can bend or rack a gate.

Problems to watch for in Pembroke Pines

Lightning and surge damage

Storm-season surges are a major cause of operator and control board failures. A gate that dies after a thunderstorm often points to the board or the power feed.

Failed or misaligned photo-eyes

Dirty, knocked or corroded sensors can make a gate stop, reverse or refuse to close. These safety devices matter for entrapment protection under UL 325.

Corroded motors and hardware

Year-round humidity and salt-laden air can rust operator housings, hinges, rollers and tracks. Corrosion-resistant parts and regular service matter in this climate.

Keypad and intercom faults

Humidity can corrode keypads and intercoms, leaving residents or guests unable to get in. Fixing or replacing the unit is often straightforward for a pro.

Power outages and backup

During hurricane-season outages, a gate without battery or solar backup may stay shut or stuck open. A pro can talk through backup options.

Storm-damaged gate structure

After high winds, a gate can be bent, racked or pulled off its post. Structure and footing work may need permits and must meet wind-load requirements.

What your MB pro can help with

  • Gate opener repair and replacementYour MB pro can diagnose a failed motor, board or arm and repair or replace the operator after a free estimate.
  • Swing and slide gate hardwareHinges, rollers, tracks and latches wear out faster in humid, salty air, and your MB pro can service or swap them.
  • Keypads, intercoms and sensorsYour MB pro can address keypads, intercoms, safety sensors and loops so the gate responds and stops safely.
  • New gate installationFor a new gate, your MB pro can walk you through permits, HOA review and the wind-load rules that apply in Broward County.
  • Battery and solar backupAsk your MB pro about backup power so the gate keeps working through outages after named storms.

Permits and codes in Pembroke Pines

Florida does not issue a dedicated statewide automatic gate license, and mechanical gate and operator service is often done without a construction license. However, the line-voltage electrical work feeding an operator must be done by a licensed electrical contractor under the Electrical Contractors' Licensing Board, part of the Florida Department of Business and Professional Regulation (DBPR), and new gate structures, columns or footings may require a licensed contractor. Pembroke Pines is in Broward County, so it falls in the High-Velocity Hurricane Zone, where gate structures face stricter wind-load provisions and exterior products may need a Miami-Dade Notice of Acceptance. New gates, operators and circuits generally need permits, while like-for-like repairs usually do not. Local fire marshals commonly require emergency access such as a Knox box or key switch, so confirm with the city's building department and verify any license on the DBPR website.

Your MB pro handles the permit when the job needs one. You can look up a contractor's license at Florida DBPR.

When to reach out

Demand tends to rise ahead of hurricane season in May and June, again after named storms from August through October, and in late fall when seasonal residents return and reopen homes. If your gate acts up, booking before a storm is easier than after one. Call (954) 707-6550 or request a free estimate with the form on the page, and we will match you with a vetted pro near you and book the visit.

We match homeowners with pros across Pembroke Pines, including Pembroke Falls, Chapel Trail, Silver Lakes, Pembroke Isles, Century Village Pembroke Pines, Grand Palms, Towngate, Pembroke Shores, Raintree and West Pines.

How it works

  1. Step 1

    Tell us what you need

    Call or send the short form with your city and the job. Estimates are free.

  2. Step 2

    We match you with a vetted pro near you

    We pick a vetted pro from our network who works in your part of Florida and book the visit.

  3. Step 3

    Your pro gives a free estimate and does the work

    Your MB pro looks at the job and gives you a free estimate. You decide whether to go ahead — and we stay your point of contact.

Automatic Gates in Pembroke Pines: common questions

Why does my Pembroke Pines gate stop working after thunderstorms?
Frequent summer lightning and power surges are a major cause of operator and control board failures. Look for an indicator light and note whether the remote responds, then call a pro rather than opening the control box.
Do I need a permit to repair my gate operator?
Like-for-like repair of an existing operator usually does not need one, but a new gate, operator, columns, footings or electrical circuit generally does. Your MB pro will tell you what applies, and you can verify with the local building department.
Does the electrical work need a licensed electrician?
Yes, the line-voltage electrical work feeding an operator must be done by a licensed electrical contractor in Florida. Verify the license on the DBPR website before work starts.
My community is gated. Do I need HOA approval?
Gated communities and HOAs are very common in Pembroke Pines, and visible exterior changes often go through architectural review. Ask your HOA before a new or replacement gate, and ask your pro to put the scope in writing.
Is it safe to keep using a gate that reverses oddly?
If the gate does not reverse when it meets an obstruction, stop using it automatically and keep people and pets clear. Entrapment protection under UL 325 depends on working photo-eyes and safety devices.

Request a free automatic gates estimate in Pembroke Pines

Tell us what's going on. We'll match you with a vetted pro near you.

  1. 1Tell us what you need.
  2. 2We match you with a vetted pro near you.
  3. 3Your pro gives a free estimate and does the work.

Prefer to talk?

(954) 707-6550

We only use your details to handle your request and share it with your MB pro. See our privacy policy and terms.

(954) 707-6550Free estimate